Home > Windows 7 > Sp1 Update Error 0x800f0a12

Sp1 Update Error 0x800f0a12

Contents

Unfortunately disabling anti-virus had no effect on resolving the error. But the GRUB - no using the Microsoft bootloader - was not the cause of the problem. Reply joscon [Microsoft] says: December 6, 2016 at 10:02 pm @Nick; Glad you got it taken care of. DISM has a switch that allows the system drive to be specified: /SysDriveDir: "Specifies the path to the location of the BootMgr files. http://whistlemedia.net/windows-7/sp1-not-listed-as-windows-update.html

SECTION #B ->Error reads ‘The boot configuration data store could not be opened. i'm afraid to touch the BCD since i have no way of restoring the SmartON OS if it's fudged. to activate do the following: 1. Reply joscon [Microsoft] says: December 6, 2016 at 10:02 pm Excellent Greg, glad it worked out for you. http://windows.microsoft.com/en-us/windows7/windows-7-windows-server-2008-r2-service-pack-1-sp1-installation-error-0x800F0A12

Service Pack Installation Failed With Error Code 0x800f0a12.

Makes me wonder why this can't occur during the SP install, or why BCD can't be rebuilt "on the fly" if necessary, or why the SP installer even cares about BootBCD. We dont use DVD media post install so I am not sure what the context of this without the log itself. Does that make sense? -Joseph Reply joscon [Microsoft] says: December 6, 2016 at 10:02 pm @wptski; It's looking for a C++ file. Reply ↓ © Christopher Schiffner 2016 This web site uses cookies to improve your experience.

  1. So to boot to the sixth item in the list, the line would read GRUB_DEFAULT=5.
  2. Apart from the issues mentioned above?
  3. I have a dual-boot with Ubuntu using GRUB 2.
  4. Reply ↓ Andreas on April 24, 2013 at 7:57 am said: Thanks mate.
  5. When it determines that the active partition is not able to start Windows directly, it produces the error message.
  6. Joseph, does SP1 support this kind of setup?

For a detailed read visit Microsoft. Why does Davy Jones not want his heart around him? You may also refer to the English Version of this knowledge base article for up-to-date information. Windows 7 Service Pack 1 Is there anyway that I can install the RTM without uninstalling the old RC?

See All See All ZDNet Connect with us © 2016 CBS Interactive. On the left-hand side, open up "Disk Management" (under "Storage") by clicking on it. 3. Reply G225 MVP says: February 28, 2011 at 8:01 am Enter in Disk manager and right Click and Active Windows 7 Partition. http://answers.microsoft.com/en-us/windows/forum/all/error-0x800f0a12-when-attempting-to-install/a5801526-8b79-4431-b407-5a510e27cc5e Does anyone have any suggestions?

That means that the first item in the list is 0 and that the sixth item is actually 5. Diskpart Reply Max says: February 23, 2011 at 5:32 pm I got the same 0x800F0A12 error, but the DISKPART stuff didn't help. The hidden partition was already Active, so on a whim, I tried assigning it a drive letter, using Disk Management. Looks like Microsoft is really pushing the single OS install, considering it would be straightforward to put in logic to handle these other cases also.

Windows 7 Sp1 Error 0x800f0a12 Dual Boot

All rights reserved. Reply joscon [Microsoft] says: December 6, 2016 at 10:02 pm @la pouter; Ce que vous avez essayé déjà ? Service Pack Installation Failed With Error Code 0x800f0a12. Access is denied’. -> You might have gone in the command prompt with administrator privileges. Download Windows 7 Sp1 I don't have a dual boot system however I have used Darik's DBAN and Gparted which are of course Linux based so I am wondering if the issue somehow carries over

Make sure the boot partition has a drive letter assigned to it, if not assign one via the Windows Disk Management. 3. Any idea how to install SP1 in this case? {{offlineMessage}} Try Microsoft Edge, a fast and secure browser that's designed for Windows 10 Get started Store Store home Devices Microsoft Surface PCs & tablets Xbox Virtual reality Accessories Windows phone Rebuild the BCD store on your system by booting into WinRE and run the command: bootrec /rebuildbcd to rebuild the file Lastly, disconnect any external devices, particularly storage devices such as Kb976932

The mother board I am using is an ASUS P6T Deluxe and I am using the motherboards onboard raid with drivers from Asus and intel. Make sure you a minimum of 1GB free space on the boot drive. Reply joscon [Microsoft] says: December 6, 2016 at 10:02 pm You can rebuild the BCD store by renaming it and then booting into WinRE and running bootrec /rebuildbcd. this content Veritas does not guarantee the accuracy regarding the completeness of the translation.

Same old story, Win7 SP1 Failure to configure, hangs, loops, has the power plug ripped out as a result. Reply joscon [Microsoft] says: December 6, 2016 at 10:02 pm Sure thing, glad to help as much as I can. For all those in this predicament, follow the suggestion given previously to mount a drive letter to the 100MB system reserved volume in disk management so that SP1 can access it

Reply Anonymous says: December 6, 2016 at 10:02 pm Okay, the suggestions have allowed the install to start and run about 16 minutes but then I now get, ERROR_SXS_ASSEMBLY MISSING (080073701).

Comparing the problem one to all the others, it seems that there are three missing locations of files. SP1 installed after that. Does the RC expire? automount enable 3.

Thanks, and sucess. Changed 100 MB partition to active and retried and voila, it FINALLLLLLLY got installed. 4. Privacy Policy | Cookies | Ad Choice | Advertise | Terms of Use | Mobile User Agreement Visit other CBS Interactive sites: Select SiteCBS CaresCBS FilmsCBS RadioCBS.comCBSInteractiveCBSNews.comCBSSports.comChowhoundCNETCollege NetworksGameSpotLast.fmMaxPrepsMetacritic.comMoneywatchmySimonRadio.comSearch.comShopper.comShowtimeTechRepublicThe InsiderTV.comUrbanBaby.comZDNet Topics All have a peek at these guys Also, a lot more booting occurs winload.exe -> explorer.exe than BIOS -> bootmgr.exe.

You all rock! You can insure the partition is being mounted by running a command prompt elevated as Administrator and entering “mountvol /E” at the command prompt. Compared to Markus Schwarz gparted table, I have at /dev/sda1: Partition | File System | Label |Size anyway, to use WinRE i'll need to prepare a UFD.

I'm always happy to give back what I have learnt on blogs like yours. That took much effort to fix and it was excruciatingly annoying to fix -- so I wish not to do it again 🙁 I have tried: - enabling automount in diskpart+reboot I'm not sure but I think Fedora and OpenSuse stull use grub legacy. For whatever reason, the last step was skipped and it finished.

Hope this helps. If I understand Danielle correctly, I would have to 1) set the flag of sda1 to 'boot'. 2) remove the 'boot' flag from sda3 as well (two boot partitions seem odd Now the computer is not booting anymore (bootmgr missing). There is a growing case for Microsoft to release an SP1a, with these sort of problems resolved.

The fix, according to this report, is to use Windows Disk Management to set the System Reserved partition as active; if there's no System Reserved partition, set the Windows volume as active. Reply joscon [Microsoft] says: December 6, 2016 at 10:02 pm Ok, that makes sense on your issue then. Reply Anonymous says: December 6, 2016 at 10:02 pm joscon: If I set it up correctly you should be able to download the entire CBS.log during the SP1 install attempt at: I realize there are Diskpart commands like this: > sel disk=system > sel part=1 > det part However that assumes you already know where the active parition is, else you might

Or is there any way that I can (without re-installing Windows) rebuild the backup from the original source media? I propose that MS bootloader/disk partition teams go and talk with GRUB developers as soon as possible, so that this kind of problems can be avoided in the future. social.technet.microsoft.com/…/05c74dc1-a102-4cbd-9724-5c804f500a80 windows 7 doesn't boot if one hard disk taken from NAS is plugged via the sata cable directly to the main board. Thanks!

Reply Drewfus says: February 24, 2011 at 6:04 am Just to be picky, i would not be refering to a 'System Reserved partition'. No access to this portion of the HDD means that the files contained cannot be upgraded with the new resources featured by Service Pack 1. Reply joscon [Microsoft] says: December 6, 2016 at 10:02 pm Are you getting the error above?